White
Showing 21–29 of 29 results
Filters
-
DOWSIL™ TC-4025 Dispensable Thermal Pad
- Can be used as a printable PAD
- Can replace the traditional manufactured pad
- Use as a gap filler
- Dispensed or printed through manual or automated processes
- Deposit of features for precise coverage of components
- Lower cost of ownership than manufactured pads
- Excellent thermal performance
- Soft, stress-relieving and shock-dampening
- Reworkable
-
MG Chemicals 8329TCM
- Thermal conductivity of 1.4 W/(m-K)
- Mixing ratio 1:1
- Processing time: 45 minutes
- Cure time: 24 hours at room temperature or 1 hour at 65 °C (149 °F)
- Provides strong electrical insulation
- High mechanical strength
- Strong resistance to moisture, salt water, light bases and aliphatic hydrocarbons
-
MG Chemicals 8329TFF
- Thermal conductivity of 0.8 W/(m-K)
- Mixing ratio 1:1
- Fire-retardant - UL 94V-0 registered
- Processing time: 5 minutes
- Installation time: 15 minutes
- Provides strong electrical insulation
- Low CTE before Tg
- High tensile and compressive strength
- Strong resistance to moisture, salt water, light bases and aliphatic hydrocarbons
-
MG Chemicals 9460TC
- High thermal conductivity
- No mixing required before use
- Provides strong electrical insulation
- Low cure temperature (<100 °C)
- Storage at room temperature (≤22 °C)
- Bonds well to a wide variety of substances
- Strong resistance to moisture, salt water, light bases and aliphatic hydrocarbons
-
SILASTIC™ RBL-9694-45M Liquid Silicone Rubber
- Addition-curing two-component silicone elastomer
- Easy-to-use and easy-to-manage 1:1 mixing ratio
- High tear resistance
- Low compression set
- Good adhesion to many substrates
- Hardness suitable for sealing applications with high clamping loads
- The non-sagging nature allows for accurate and uniform seal beads of precise dimensions as defined by the application parameters of the robot.
- Does not require solvents, CFCs or other environmentally harmful materials for processing
-
SYN-setral-INT/250 FD-2
- For long-term or life-time lubrication of rolling and plain bearings and all sliding pairs susceptible to wear under extreme conditions, especially in food and pharmaceutical industries
- Without MOSH/MOAH as a formulation component according to EU definition 2017/84
- High load carrying ability
- Free from animal ingredients
- Free from allergens
- Excellent wear protection
- Extended relubrication cycles
- Resistant against chemicals and aggressive media
- Neutral to most plastics and elastomers
- Resistant to oxidation and ageing
- Economical in consumption
- Does not change DLC coating (sulfur-free)
